mbitlogo

Madhuben & Bhanubhai Patel Institute of Technology

(A Constituent College of CVM University)

Faculty Details

Prof. Faiju Malek

  • Assistant Professor
  • frmalek@mbit.edu.in
  • 02692-230823
  • 9428435202

Total Experience

Teaching 21 Years 00 Months
Industry 06 Months

Membership

Life Member of Indian Society for Technical Education (ISTE) (LM 53055)
Specialization Area : Machine Design
Subject Taught : Engineering Graphics, Materials science, Metallurgy, Machine Design, Theory of Machines, Automated Manufacturing, Computer-Aided Design, Control Engineering, Computer-Aided Drafting, and Computing.

Academic Qualifications

Qualification Specialization University Passing Year Class
PhD Mechanical Engineering CVM University, V.V.Nagar Pursuing
M.Tech. Mechanical with specialization in Machine Design Sardar Patel University, V.V.Nagar 2007 Distinction
B.E. Mechanical Engineering Sardar Patel University, V.V.Nagar 2000 Distinction

Experience Details

18th October 2021 to Till Date Working as an Assistant Professor in the Applied Science and Humanities Department at MBIT.
1st May 2002 to 17th October 2021 Worked as an Assistant Professor in Department of Mechanical Engineering, G.H.Patel College of Engineering and Technology (GCET).
September 2000 to 28th February, 2001 Worked as an apprentice Engineer in Quality Control Department of GMM Pfaudler, Karamsad.

Publications Details

International / National Journal:
  1. Published a paper titled “Design Optimization of Mechanical Screw Jack” in International Journal of Futuristic Trends in Engineering and Technology, ISSN: 2348-5264 (Print), ISSN: 2348-4071 (Online), Volume I, Issue VI, July 2014.
  2. Published a paper titled “Forward kinematics and differential motion analysis of SCORBOT ER-V plus robotic system” in International Journal of Innovative Research in Science, Engineering and Technology,ISSN(Online) : 2319 – 8753, Volume 4, Issue 4, April 2015.
  3. Published a paper in International Journal of Futuristic Trends in Engineering and Technology, ISSN: 2348-5264 (Print), ISSN: 2348-4071, Vol. 3 (05), April 2016 (Online) titled “Design of a Guiding Mechanism for Welding over given Circular Profile” .
  4. Published a paper in International Journal of Innovative Research in Science, Engineering and Technology, ISSN(Online) : 2319-8753, Vol. 5, Issue 5, May 2016, titled “Mechanically Operated Cart for Pesticide Sprayer for Agriculture”.
International / National Conference:
  1. Presented a paper titled “Emerging trends in Non-destructive Testing: Ultrasonic test” in national conference on Emerging Trends in Mechanical Engineering (ETME-2008), organized by G.H.Patel College of Engineering and Technology during 28-29 March 2008.
  2. Presented a paper titled “Effectiveness analysis of three different trajectory schemes on path planning of five axes articulated robotic manipulator” in International Conference on Advances in Mechanical Engineering (ICAME-2010) organized by the department of mechanical engineering, Sardar vallabhbhai national institute of technology (SVNIT), surat, Gujarat, India during 4th -6th January 2010.
  3. Published a paper titled “Design and Finite Element Analysis of Mechanical Screw Jack” in the proceeding of 1st International Conference on Mechanical Engineering: Emerging Trends for sustainability (IC MEETS-2014), organized by department of mechanical engineering, Maulana Azad National Institute of Technology, Bhopal, Madhya Pradesh, India during 29th -31st ,January 2014.
  4. Published paper titled “Optimum Selection of Non-traditional Machining Process using TOPSIS” in International Conference on Emerging trends in mechanical engineering (ICETME-17), during 24th -25th February 2017, organized by Department of Mechanical engineering, G.H.Patel college of engineering and technology. Page-119 to124. ISBN: 978-93-84659-77-6

Activities

STTP:
  • One day workshop on “Design, selection & operation of Heat Exchangers” organized by G.H. Patel College of Engineering & Technology in association with Larsen & Toubro limited and L & T Chiyoda Limited held on Saturday, 12th October, 2002.
  • Four-day workshop on “MATLAB for Engineers” organized by GCET- ISTE students chapter at G.H. Patel College of Engineering & Technology from 08th to 11th March 2004.
  • Two day Workshop on “Utilization of Educational Standards” organized by GCET-ISTE Chapter in association with BUREAU OF INDIAN STNADARDS (BIS)-NEW DELHI on 20-21 January 2005.
  • Theoretical class room training course and practical demonstration on “Penetrant Testing (PT) as an NDT Technique” organized by IMAZE’05 at G.H.Patel College Of Engineering & Technology on 15th April 2005. Total duration of the programme was as per the guidelines given in Recommended practice SNT-TC-1A of ASNT Level 1 (one) 2001 edition.
  • One day workshop on “Research Methodology in Engineering Education” organized by G.H.Patel College of Engineering and Technology (GCET), on 22nd April,2006.
  • One day seminar on “Non-Destructive Testing” organized by Department of Mechanical Engineering, GCET on 11th March, 2007.
  • One day regional seminar on “XXI century: Priorities in Technical and Higher Education” organized by Charutar Vidya Mandal in Association with ISTE, Gujarat Section & Gujarat University on August-3rd, 2011.
  • One day seminar on “Fundamentals of Tribology” organized by GTU, Ahmedabad on 5th October, 2013 at G.H.Patel College of Engineering and technology, V.V.Nagar.
  • One day workshop on NDT (Non-Destructive Testing) organized by department of mechanical engineering, GCET, under the auspices of ISTE on 15th October, 2014.
FDP:
  • Training programme on “Industrial oil hydraulics” at G.H. Patel College of Engineering & Technology from 16th to 20th July 2001.Attended One Week Orientation Program For New Faculty Begins From Wednesday, 4/12/19 To Tuesday 10/12/19 (Except For Sunday) From 3.30 To 6 Pm At The H M Patel CDC.
  • “UGC sponsored refresher course in Materials Science” organized by Department of Materials Science, Sardar Patel University, Vallabh Vidyanagar from 1st to 21st December 2004 and obtained Grade “A”.
  • One week ISTE approved short term training course on “Industrial Automation and Robotics”, at Ajay kumar Garg college of Engineering and Technology, Ghaziabad, from January 8-12, 2007.
  • AICTE-ISTE Sponsored one week Short Term Training Program on “concurrent engineering for product Design & Development”, from 24th to 28th February,2009, at G.H.Patel College of Engineering & Technology, Vallabh Vidyanagar-388120, Gujarat.
  • One week STTP on “CAD using ProE” at V.V.P Engineering college, Rajkot, organized by SVNIT, surat, from 4th to 8th June, 2012.
  • One week ISTE approved & GTU sponsored STTP on “Importance of CAD/CAM” at L.D.College of Engineering , Ahmedabad from 18-22nd November, 2013.
  • One week Faculty development programme on “Quality Engineering and Management” sponsored by The Institute of Engineers (India) and organized by GCET during 15th to 19th December, 2014.
  • One week STTP on “dynamic Analysis of Mechanism and Machine” organized by Mechanical and Mechatronics department, GCET, during 5th to 9th January, 2015.
  • One week STTP on “Advances in mechanical engineering” organized by Department of Mechanical engineering, Birla Vishwakarma Mahavidyalaya from 25to 29 May, 2015.
  • One week STTP on “Fundamentals of Tribology and its Applications” supported by ISTE and IE(I) and organized by Mechanical Engineering Department of G H Patel College of Engineering and Technology during 7th to 11th December, 2015.
  • One week STTP on TEQIP-II sponsored “Computer Aided Engineering Using CREO” orgainzed by Mechanical Engineering Department of Birla Vishwakarma Mahavidalaya during May 16-20, 2016.
  • One week STTP on “Research trends in Robotics” sponsored by ISTE-new delhi and Institute of Engineers (india) and organized by department of mechanical engineering of G.H.Patel College of Engineering and Technology, Vallabh Vidyanagar during 5th to 10th December, 2016
  • One week short term training programme on “FINITE ELEMENT ANALYSIS” organized by production engineering department of BVM Engineering College, V.V.Nagar, sponsored by TEQIP-II from March 25-31,2017.
Conference Attended:
  • Two days National Conference on “Emerging trends in mechanical engineering (ETME)-2008”, 28-29 March,2008, at
    G.H.Patel College of Engineering & Technology, Vallabh Vidyanagar-388120, Gujarat.
  • Third International Conference on Advances in Mechanical Engineering (ICAME-2010), January 4-6, 2010, S.V. National
    Institute of Technology, Surat – 395 007, Gujarat, India.
X